Your Everion is attached to your upper arm with an armband. It is designed to be worn day and night and has a sweat-proof and water-resistant design. There are two methods of how to put your Everion on your upper arm with the armband.
1 Main method
- Hold your Everion in one hand with the sensors facing downwards
- Place the first fastener on your Everion
- Now snap the fastener onto your Everion
- Press the fastener all the way down until it rests in the lower groove
- Create a loop with the armband
- Attach the second fastener to your Everion
- Slip the Everion with the already attached armband over your hand and up to your upper arm:
- on the outside of your upper arm
- directly on the skin
- about two fingers above your elbow-crease
- If you are tall, you may need to position it three to four fingers above your elbow-crease
2 Alternative method
- Position your Everion with the attached armband:
- on the outside of your upper arm
- directly on the skin
- about two fingers above your elbow-crease
- If you are tall, you may need to position it three to four fingers above your elbow-crease
- Pull the armband around your upper arm and place the second fastener on your Everion
- Now snap the second fastener onto your Everion
- Press the second fastener all the way down until it rests in the upper groove
This way, you can attach your Everion with one hand and over an infusion line if necessary. Please replace your armband with a new one if it is becoming looser and the Everion is no longer properly held in place.
How to take off your device
Either slip it back down your arm.
Or detach the first fastener and take it off.
Video